●How do I install the cellphone App (aTLi Camera) for the camera?
●How do I install the battery?
●How do I turn on T100?
●How do I register T100 to aTLi Camera?
●How do I connect to T100 after it is registered to aTLi Camera?
●Why is the image not clear or in focus?
●Can I use other battery?
●How do I charge the battery?
●Can I use external power source while using T100?
●How do I know the battery is low?
●Why does T100 turn off a few moments after it is turned on?
●What is the run time for a fully charged battery?
●What is power saving mode?
When enabled (by default), power saving mode is used to preserve battery power while an external power source is not connected. Two possible scenarios are:
1.This mode causes T100 to shut down when there is no active web/App connection and no active shooting session or schedule.
2.This mode causes T100 to enter a sleep mode when there is no active web/App connection but an active shooting session or schedule (shooting interval must be 5 seconds or more) is in progress. T100 wakes up to take shots according to the shooting interval. When T100 is in sleep mode, its wifi is turn off and aTLi Camera App won’t be able to connect to it. You need to wake it up by pressing the power button momentarily.
●How do I know when the T100 is in sleep mode?
●Can T100 support tripod?
●How do I reboot T100 if abnormal operation occurs?
●Can T100 be operated in an outdoor environment?
Please note the following conditions when using T100 in an outdoor environment.
1.T100 operating temperature range is from 0 to 40 degrees Celsius with non-condensing humidity.
2.The battery life is much shorter when operating T100 in a low temperature environment. It is recommended to use an external power source under this condition in order to ensure normal operation.
3.Please do not operate T100 in rains unless it is properly protected. It is recommended to purchase the silicon case accessory for rain protection.
●Is T100 waterproof?
●How do I start shooting?
Please refer Q4 and Q5 for T100 registration and connection with aTLi Camera App. Once aTLi Camera is showing the camera image, perform the followings before start shooting.
1.Select camera mode (time lapse, video, photo) by pressing the top middle icon.
2.Select shooting mode by pressing the top right hand icon.
3.Adjust the focus by turning the lens ring at the front. A quick way for far view focus (object greater than 80 cm away) is to align the green marker on the lens ring with the LED indicator.
4.Press the round button at the bottom of the screen to start shooting. For time lapse camera mode, you need to set the shooting time interval and duration (optional).
5.Press the red square button to stop the shooting/recording.
●Where can I find the recorded photos or videos?
●Where can I find the downloaded photos / Videos?
●Can T100 record audio?
●How do I share recorded photos / videos?
●What is live replay?
● Is it possible to schedule a shooting event?